Design and development of Automotive BIW welding Tool and Fixture
This was a development project to have a unique welding tool for two different car body panels which were designed for different Car programs for an Automotive giant.
 

Multiphase Flow Simulation for the Fluid Level in the Reservoir with Different Accelerations of the Vehicle
This was a development project to have a good baffle system for reducing the sloshing problem in the reservoir.
 

Productivity analysis and improvement in Design using ANSYS Workbench environment.
Analysis and Design Optimization of design for Gusset shape side stakes for freight cars.
 

Simulation of LNG leak fire from piping lines
Complete flow behavior and heat distribution of flame for few seconds. Hexahedral mesh for the given cad model and unsteady simulations carried out in commercial coupled solver. Reactive and multiphase simulation has been carried out.
 

Ventilation study for conference hall at different types of heat and flow load conditions
To manufacture a batch of water pump from physical sample available.
 

Designing of 3D CAD Model from and Manufacturing Drawing from Physical Model
To manufacture a batch of water pump from physical sample available.
 

Re-Design of 3D CAD Model from Poor Scanned Image
Re-Designing of a part based on older designs and to manufacture spare parts using new machine tools.
 

Manufacturing the 6 Gun Electron beam furnace for Titanium processing
Design of Gun Vacuum Piping of Electron beam Furnace
 

Automated Machine Design of Cap & Screw Tube
The primary objective of this project is to design the different operation system. And the secondary objective is selecting the suitable accessories & validate the design by Simulation.
 

Transceivers Clamp Redesign per DFMA techniques for Optical communications major
This was a R&D project to address various concerns with customer on their product design (Gigabit modules / Transceivers).